Planning a Just a Pinch V2 wholesale order? Start a countertop display plan with capacity: each Just a Pinch countertop display holds 10 pinches. Divide the number of units you want to display by 10, then round up to a whole stand. That gives every unit a place, including the remainder in a smaller opening order.
How many Stands do you need?
- 25 units: 3 Stands, with room for 30 units.
- 50 units: 5 Stands.
- 100 units: 10 Stands.
- 250 units: 25 Stands.
For example, two Stands would hold only 20 units from a 25-unit pack. A third Stand provides the remaining five spaces, with five extra spaces available.
Choose between Stands and Product Packaging
The No Product Packaging + Stands setup is intended for units supplied without individual Product Packaging. Stand quantities follow the capacity breakdown above.
The Product Packaging + No Stands setup provides individual Product Packaging for each unit and does not include Stands. Pick the setup around how your store plans to present and hand over the product.
Separate display stock from reserve stock
You do not have to put every Stand on the counter at once. Decide how many units belong in the customer-facing display and how many you want to keep as reserve stock. For a larger order, keeping some stock behind the counter may suit your available space better than displaying the entire quantity.
Before committing to a layout, confirm the Stand dimensions and measure the space available. Capacity alone does not tell you how much counter space a display needs.
Plan timing and special requests
V2 is a preorder, so confirm dispatch timing before planning a launch or event around its arrival. For more than 250 units or custom logo engraving, contact the Pinch team with your quantity and, for engraving, a link to the logo artwork.
To understand the product itself, explore Pinch Products or read our FAQ.
Cover image: Pinch Products countertop display design concept, shown for layout planning. Final production appearance may vary.
